- Should I use 4×4 or 6×6 fence posts?
- Is 1 ft deep enough for fence post?
- How high should my fence be off the ground?
- How many bags of concrete do I need for a 4×4 fence post?
- How deep should a 8 foot fence post be?
- How deep should a 6×6 post be in the ground?
- What size posts do I need for a 6ft fence?
- Will wooden posts rot in concrete?
- Is 2 feet deep enough for fence posts?
- Should I use concrete for fence posts?
- How many bags of quikrete do I need for a fence post?
- How big of a hole do I need for a 4×4 post?

## Should I use 4×4 or 6×6 fence posts?

6×6 is overkill for sturdiness.

4×4 is the standard.

And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial..

## Is 1 ft deep enough for fence post?

You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.

## How high should my fence be off the ground?

two inchesIn most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground.

## How many bags of concrete do I need for a 4×4 fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

## How deep should a 8 foot fence post be?

In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level.

## How deep should a 6×6 post be in the ground?

The depth of your hole should be about 1/4 of the height of your post. For a 6×6 post, the diameter of the holes should be about 12 inches square. As a rule the width of your post hole should never be less than 10 inches.

## What size posts do I need for a 6ft fence?

If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

## Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.

## Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

## Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

## How many bags of quikrete do I need for a fence post?

Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.

## How big of a hole do I need for a 4×4 post?

about 12 inches wideDig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).